GENUINE Siemens Deka 630CC 60lb Injectors SHORT FI114962 107-962 107962 – Set of Five (5)

60lb/h Siemens Deka High Impedance (Short Style) with EV1 Connector – FI114962 (37.5mm)Genuine Siemens / Mototron DEKA IV High Impedance InjectorsUltra-Compact, high flow injector at just 37.5mm end to end! These injectors flow 60 lbs/hr at 43.5 PSI ( 3 BAR ) and up to 85 lbs/hr at 87 PSI! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 30 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.Features:  Genuine, reliable Siemens Injectors  Excellent response characteristics  Robust Design  High Impedance  Low Impedance performance characteristics with High Impedance CompatibilitySpecifications:  Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)  Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min  Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min  Gain: 0.11ms/mg  Offset: 0.055ms  Turn on time @ 14VDC: 1.14ms  Turn off time: 0.85ms @ 600KPa  Connector: Minitimer EV1  Series: DEKA 4 ( DEKA IV )  Orifice Type: Multi-orifice  Spray Pattern: 30 Degree Spray Cone  Factory fitted with Viton upper and lower o-rings 37.5mm end to endEquivalent Part Numbers: Siemens FI114962 or 107-962 ( 107962 ) Mototron INJ-GAS-002 ( S107)