Trackspec Autosports Porsche LWB 918 Seat Recliner Brackets Black -Anodized 911 991 GT3 GT3RS GT4 (SET of 2 / 2x SEATS) These brackets raise your Porsche LWB seats approximately 1″ in the front, reclining the seat. One order provides brackets to adjust ONE seat. For owners who feel the stock seat position is too upright. Installation instructions are supplied. 6061-T6 Billet Aluminum Made in the USA One set reclines one seat. All mounting hardware is included. Raises your Porsche Carbon Fiber LWB seats approximately 1″ in the front For owners who feel the stock seat position is too upright. 991.1 991.2 GT3 GT3RS GT4 kit contents One kit will work on either driver or passenger seat. x2 inner bracket x2 outer bracket x4 M6 bolts x4 M10 bolts x4 M10 washers x4 M10 nuts tools needed 3/8” ratchet E12 socket (3/8″ drive) 6mm Allen 8mm Allen 10mm wrench 16mm wrench 17mm wrench Blue Loctite or Medium strength thread locker ATTN: 718 GT4 Owners The 718 GT4 has less rearward clearance. Due to the seat being reclined back, the seat will interfere with the firewall if it adjusted all the way back and lower than the highest setting. TO PREVENT DAMAGING YOUR SEAT, MAKE SURE YOU HAVE REAR CLEARANCE BEFORE LOWERING THE SEAT HEIGHT. Seat at highest position: 8.5″ of forward to back movement (full range) Seat at middle height position: 7.5″ of forward to back movement (12% less) Seat at lowest position: 6.5″ of forward to back movement (24% less)
